ikeGPS Software - ikeOS v4.7.0 release
Posted by Phil Drummond on Sun, Nov 13, 2011 @ 07:17 PM
ikeGPS announces the release of ikeOS v4.7.0 for our ike1000, ike300 and ike100 users.
This version of ikeOS improves the robustness of the user interface when switching data capture modes.
Key features of v4.7.0 are:
ikeCapture Modes: Tapping the ikeCapture Mode indicator will show the list of available data capture modes. This allows quick switching between capture modes. More details on data capture modes is available in Chapter 8 of the ikeGPS User Guide.
ikeCapture Output: Output data files are now prefixed to indicate the data capture mode used.
|
Photo Only = pic (csv, jpg & XML)
pic_[yyyyMMdd].csv
pic_[serial number]_[yyyyMMdd]_[hhmmss].jpg
pic_[serial number]_[yyyyMMdd]_[hhmmss].xml
|
|
Target Positon = tgt (csv, kml, jpg, & XML)
tgt_[yyyyMMdd].csv
tgt_[yyyyMMdd].kml
tgt_[serial number]_[yyyyMMdd]_[hhmmss].jpg
tgt_[serial number]_[yyyyMMdd]_[hhmmss].xml
|
|
Span Height = sph (csv, kml, jpg, & XML)
sph_[yyyyMMdd].csv
sph [yyyyMMdd].kml
sph [serial number]_[yyyyMMdd]_[hhmmss].jpg
sph [serial number]_[yyyyMMdd]_[hhmmss].xml
|
|
TrueSize = tru (csv, kml, jpg, & XML)
tru_[yyyyMMdd].csv
tru_[yyyyMMdd].kml
tru_[serial number]_[yyyyMMdd]_[hhmmss].jpg
tru_[serial number]_[yyyyMMdd]_[hhmmss].xml
|
Additional details of output data file structure is available in Appendix A (ikeCapture CSV Metadata) of the ikeGPS User Guide.
ikeOS v4.7.0 is available for download via the ikeGPS Support Download ikeOS form.
Note: Updating ikeOS requires a factory reset with all data and other applications being deleted from the ikeGPS unit (including ikePad and the ikeCapture Extension for ArcPad). Should you have any important data stored on your ikeGPS unit please ensure this data is backed up prior to installing this update. If you have any additional applications installed, please reinstall and re-register these following the completion of the ikeOS update. Further information is included in “iketip - Install or Re-install ikeOS on ike100/300/1000” or the ikeGPS User Manual.
NOTE FOR USERS OF IKEPAD/IKECAPTURE EXTENSION FOR ARCPAD:
Please also be aware, if you are a user of ikePad (or the ikeCapture Extension for ArcPad), we recommend that you also update to v1.0.7 of the ikeCapture Extension for ArcPad software.
ikeCapture Extension for ArcPad v1.0.7
The ikePad/ArcPad ikeCapture Extension toolbar forms the bridge between ArcPad & ikeCapture. This allows data captured in ikeCapture to be stored in feature-rich, customizable ArcPad point, line or polygon layers.
Additional documentation for ikePad/ikeCapture Extension can be found in the ikeCapture Extension User Guide.
As ikePad/ikeCapture Extension is commercial software, the update to ikeCapture Extension v1.0.7 requires confirmation of original purchase (and warranty eligibility) from Surveylab or a recognized ikeGPS reseller. If you require the update to ikeCapture Extension v1.0.7 please complete the Software Request form. Once your eligibility is confirmed you will be forwarded links to direct download the ikeCapture Extension v1.0.7 material.
Notes:
1) ikeCapture Extension v1.0.7 is applicable only to ike100/300/1000 ikeGPS models running ikeOS v4.5.4 or later. ikeCapture Extension v1.0.6 should be used for versions of ikeOS earlier than ikeOS v4.5.4.
2) Updating ikeCapture Extension requires a factory reset and reinstallation of the ikeOS & ikeCapture Extension software. Refer to the notes above in regards to the ikeOS v4.6.0 release for details on downloading and installing the ikeOS v4.6.0 software.
Should you have any questions about this software release or any features of your ikeGPS mobile GIS system, please contact your ikeGPS reseller directly or alternatively complete our Support Request form.
(Please note that responses to Support Requests from reseller customers may be copied to the original reseller.)